A Framing Refresher

I've had a few requests to give the instructions for how I frame my cross stitch, especially after I finally framed my Kitty Kalendar a few months ago. So I placed my order to American Frame for supplies to complete "Quaker Star" by Bent Creek. This is a project I stitched maybe three years ago and it had been in the "finished stitching" box just waiting for the day when I would display it. This is a pretty picture-heavy post, so be forewarned.

I chose a whitewash frame and a narrow red mat. Also in my order was a piece of foam core board for mounting. When ordering your framing supplies, measure and measure again to make sure that you're allowing enough space to accommodate your stitching.

Now here's how I do my framing. First of all, I center my stitched piece as best as I can, measuring as I go, and then I start pinning. I use silk or satin pins (about 1") that you can get wherever sewing notions are sold.

I start out placing the pins about 1" apart, but will add more to tighten everything up. At this point you will notice that I didn't put any batting or anything on the foam core board like a lot of framing tutorials show. This is personal preference. Sometimes I want that padded look, but for this piece I opted to just pin the fabric directly to the board.

Now you can see the edge completely pinned. Hint: you can use a thread in your fabric to line up with the edge of the mat!

As you pin, keep measuring to make sure that your piece is where you want it. Now is a good time to place the mat on top (or the frame if you're not using a mat) to make sure that everything looks centered and nice. Push those pins in as far as you can if you're going to leave them in there.*

Looking pretty centered!

 

The above photo shows my stitching pinned all around. Turn your work so you're looking at the back. You have to make a decision now. Do you want to lace your edges or tape them? As a rule, I will only do lacing on a small project. I'm talking really small. So I'm going to tape my edges. Don't yell at me. I saw a professional framer do this. I like this method and I've used it many times.

*I have seen people lace the edges and leave the pins in, but some framers take the pins out. Up to you. I tape and leave the pins in.

OK! It's time to secure your mounted stitching into the frame. I use a Logan point driver to do this. You can also use glazier points. American Frame sends these clip things for this purpose, but I have never been able to figure out how these work. And there may be other good solutions that I don't know about. But I like my Logan point driver. A little too much.

But seriously, this device makes this step soooooooo easy. How many points you'll use is dependent on the size of the frame. You be the judge. I bought my Logan driver at Hobby Lobby (use that coupon!). You can buy point refills there or on Amazon.

I cover the back with some brown craft paper. I cut it about a half inch larger than the frame back opening and simply glue it on. Brush the glue on with a paint brush. You don't need a lot. Then I lightly spray the paper with water. When it dries, it will tighten up.

Put on a hanger of your choice, like a saw-tooth, and you're done!

What do you think? Pretty nice, huh? It's all ready to hang up for the July 4th holiday, but I'll probably leave this up all of the time.

Some things to think about. I didn't use any kind of glass or plexiglass for this framing project. Sometimes I do and sometimes I don't. If you use glass, and don't use a mat, you will need to use spacers to make a space between your stitching and the glass. You don't want the stitching in direct contact with the glass. If your stitching has any kind of buttons, jewels, or beads on it, you have to make sure that you'll have enough room for them if you're using glass.You may have to use more than one mat or use spacers AND a mat.

This tutorial is intended to give you a general idea on how to do basic framing. American Frame is the company I order framing supplies from. There are many others. Look around. Find one you're comfortable with. If you have specific questions, contact them. They may have suggestions that I did not give in this tutorial. It's always great to learn something new! The whole idea here is to do your own framing, save a little money, and have a finished product you'll be proud to display!

Finished Stitching Finishes

Several weeks ago I received an email from a blog follower who is interested in stitching Just Nan's "Jasmine Mix". She had seen my post about this particular chart and inquired about the colors used. Because I don't have the chart anymore, I had to open my "finished stitching" box and look at the finish itself. I think I answered her questions in a satisfactory way, but the process of looking through the finished stitching box got me thinking. And the main thing I thought was "Why don't I do something with these finishes?!".

So I started with "Jasmine Mix".

Turning it into a pin cushion was a fun process. I ironed some interfacing onto the back of the stitching, sewed on some backing fabric, and then filled it with crushed walnut shells.

After hand sewing the opening, I ruched some sheer ribbon and then sewed it on all of the edges. Here's how I ruche the ribbon: I hand sew a running stitch right in the middle of the ribbon and gather as I go, knotting the thread once in a while. I keep the ribbon on the spool as I go and keep measuring as I stitch. The ruched ribbon gets sewn on by hand with matching thread.

I'm happy with the result and am glad that a random email spurred me on to finish a completed stitching project.

The next project I tackled was FINALLY framing Val's Stitchin' Stuff "Kitty Kalendar". About time, right? I've had this done for, well I don't know how long. I've also had the frame for it and had designated it's place on the wall a long time ago.

The frame is from American Frame. They will custom make frames so that you can frame it yourself!

This little cutie now hangs in my craft room exactly where I've been picturing it hanging!

I am so glad that I received that email because it made me look at all of the finished stitching I have and inspired me to do something about it! There are more pieces in there and I plan to frame or finish them as well. Now my question to you is: Do you also have a collection of completed stitching pieces that you haven't done anything with? Or do you turn them into framed pieces (or pillows, ornaments, etc.) as you go?